Home » Sony Manuals » Video Cameras » Sony DCR TRV33E » Manual Viewer

Sony DCR TRV33E Operating Instructions - Page 90

Using the viewfinder

UPC - 072874309039

Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

Using the viewfinder Utilisation du viseur You can operate camera brightness and fader on the touch panel when looking at the viewfinder. Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out to do this operation. The POWER switch should be set to or 1). Operate by touching the panel. (1) Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out, then extend the viewfinder. (2) Press OFF. The PANEL OFF indicator appears on the screen. (3) Press OK. The LCD screen is turned off. (4) Using the viewfinder, press the LCD screen. EXPOSURE, OK, ON and FADER (only when the POWER switch is set to CAMERA) appear. (5) Press the LCD screen and select a desired item, then press OK. EXPOSURE: Adjust the exposure by pressing -/ +. FADER: Press FADER until a desired fader mode appears. The indicator changes as follows: FADER t M. FADER t BOUNCE R (no indicator) r MONOTONE R r DOT* T WIPE* T OVERLAP* * DCR-TRV22E/TRV33E only ON: The LCD screen lights up. 1) DCR-TRV22E/TRV33E only Vous pouvez régler la luminosité et la transition en fondu du caméscope à l'aide de l'écran tactile tout en vérifiant l'image dans le viseur. Pour effectuer cette opération, retournez le panneau LCD et rabattez-le contre le caméscope avec l'écran LCD tourné vers l'extérieur. Réglez le commutateur POWER sur ou 1). Effectuez cette opération à l'aide de l'écran tactile. (1) Retournez le panneau LCD et rabattezle contre le caméscope avec l'écran LCD tourné vers l'extérieur, puis déployez le viseur. (2) Appuyez sur OFF. L'indicateur PANEL OFF s'affiche à l'écran. (3) Appuyez sur OK. L'écran LCD est désactivé. (4) Appuyez sur l'écran LCD en observant les images dans le viseur. EXPOSURE, OK, ON et FADER (uniquement si le commutateur POWER est réglé sur CAMERA) s'affichent. (5) Appuyez sur l'écran LCD et sélectionnez le paramètre souhaité, puis appuyez sur OK. EXPOSURE : Réglez l'exposition avec les touches -/+. FADER : Appuyez sur FADER jusqu'à ce que le mode de transition en fondu souhaité s'affiche. L'indicateur change comme suit : FADER t M. FADER t BOUNCE R (pas d'indicateur) r MONOTONE R r DOT* T WIPE* T OVERLAP* * DCR-TRV22E/TRV33E uniquement ON : L'écran LCD s'allume. 1) DCR-TRV22E/TRV33E uniquement 90

Section	Page
Table of contents	8
Quick Start Guide	12
Recording on tape	12
Recording on “Memory Stick” (DCR-TRV22E/TRV33E only)	14
Getting Started	20
Using this manual	20
Step 1 Preparing the power source	24
Installing the battery pack	24
Charging the battery pack	25
Checking status of battery pack – Battery Info	29
Connecting to a wall socket	30
Step 2 Setting the date and time	31
Step 3 Using the touch panel	33
Recording – Basics	36
Recording a picture	36
Shooting backlit subjects – Back light function	46
Shooting in the dark – NightShot/Super NightShot/Colour Slow Shutter	47
Checking recordings – End search/Edit search/Rec Review	50
Playback – Basics	52
Playing back tape	52
To display the screen indicators – Display function	54
Viewing a recording on TV	60
Advanced Recording Operations	62
Recording still images on “Memory Stick” during tape recording standby or tape recording (DCRTRV22E/TRV33E only)	62
Recording a still image on a tape – Tape Photo recording (DCRTRV12E/TRV14E/TRV19E only)	65
Self-timer recording	67
Adjusting the white balance manually	69
Using the wide mode	71
Using the fader function	73
Using special effects – Picture effect	76
Using special effects – Digital effect (DCRTRV22E/TRV33E only)	77
Using PROGRAM AE	80
Adjusting the exposure manually	82
Using spot lightmetering function – Flexible Spot Meter	83
Focusing manually	84
Using spot focus function – Spot Focus	86
Interval Recording	87
Frame by frame recording – Frame recording	89
Using the viewfinder	90
Advanced Playback Operations	92
Playing back tape with picture effect	92
Playing back tape with digital effect (DCR-TRV22E/TRV33E only)	93
Enlarging images recorded on tape – Tape PB ZOOM (DCRTRV22E/TRV33E only)	94
Quickly locating a scene – Zero set memory (DCR-TRV14E/TRV19E/TRV22E/TRV33E only)	96
Searching the boundaries of recorded tape by title – Title search (DCR-TRV14E/TRV19E/TRV22E/TRV33E only)	98
Searching a recording by date – Date search (DCR-TRV14E/TRV19E/TRV22E/TRV33E only)	100
Searching for a photo – Photo search/Photo scan (DCR-TRV14E/TRV19E only)	103
Editing	106
Dubbing tape	106
Dubbing only desired scenes – Digital program editing (on tape)	109
Recording video or TV programmes (DCR-TRV19E/TRV22E/TRV33E only)	122
Inserting a scene from a VCR – Insert editing (DCRTRV19E/TRV22E/TRV33E only)	125
Audio dubbing	127
Superimposing a title on a cassette with Cassette Memory	133
Making your own titles	136
Labelling a cassette on a cassette with Cassette Memory	138
Erasing all the data in Cassette Memory	140
“Memory Stick” Operations (DCRTRV22E/TRV33E only)	141
Using “Memory Stick”	141
Inserting/Ejecting the “Memory Stick”	146
Selecting image quality and size	147
Recording still images on “Memory Stick” – Memory Photo recording	152
Recording an image from tape as a still image	156
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX	158
Interval Photo Recording	164
Recording moving pictures on “Memory Stick” – MPEG MOVIE recording	166
Self-timer recording	168
Recording a picture from tape as a moving picture	170
Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”)	173
Changing the recording folder	177
Viewing a still image – Memory Photo playback	179
Viewing a moving picture – MPEG MOVIE playback	182
Choosing a playback folder	185
Enlarging still images recorded on “Memory Stick” – Memory PB ZOOM	186
Playing back images continuously – Slide show	188
Preventing accidental erasure – Image protection	190
Deleting images – DELETE	192
Changing image size – Resize (DCR-TRV33E only)	196
Writing a print mark – Print mark	197
Viewing images with your computer	199
Viewing images with a computer – Introduction	199
Connecting your camcorder to a computer using the USB cable (For Windows users)	203
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users)	217
Viewing images recorded on “Memory Stick” on a computer (For Windows users) (DCR-TRV22E/TRV33E only)	227
Connecting your camcorder to a computer using the USB cable (For Macintosh users) (DCR-TRV22E/TRV33E only)	233
Viewing images recorded on “Memory Stick” on a computer (For Macintosh users) (DCR-TRV22E/TRV33E only)	236
Capturing images from an analog video unit on a computer – Signal convert function (DCRTRV22E/TRV33E only)	238
Customizing Your Camcorder	240
Changing the menu settings	240
Troubleshooting	262
Types of trouble and how to correct trouble	262
Self-diagnosis display	270
Warning indicators	271
Warning messages	272
Additional Information	284
Usable cassettes	284
About the “InfoLITHIUM” battery pack	288
About i.LINK	292
Using your camcorder abroad	295
Maintenance information and precautions	296
Specifications	305
Quick Reference	309
Identifying parts and controls	309
Index	318

Match case Limit results 1 per page

You can operate camera brightness and fader

on the touch panel when looking at the

viewfinder. Turn the LCD panel over and

move it back to your camcorder body with the

LCD screen facing out to do this operation.

The POWER switch should be set to

Operate by touching the panel.

(

)

Turn the LCD panel over and move it

back to your camcorder body with the

LCD screen facing out, then extend the

viewfinder.

(

)

Press

OFF. The PANEL OFF

indicator appears on the screen.

(

)

Press OK. The LCD screen is turned off.

(

)

Using the viewfinder, press the LCD

screen. EXPOSURE,

OK,

ON and

FADER (only when the POWER switch

is set to CAMERA) appear.

(

)

Press the LCD screen and select a

desired item, then press

OK.

EXPOSURE:

Adjust the exposure by pressing –/

FADER:

Press FADER until a desired fader

mode appears.

The indicator changes as follows:

FADER

M. FADER

BOUNCE

(no indicator)

MONOTONE

DOT*

WIPE*

OVERLAP*

* DCR-TRV22E/TRV33E only

ON:

The LCD screen lights up.

DCR-TRV22E/TRV33E only

Using the viewfinder

Vous pouvez régler la luminosité et la

transition en fondu du caméscope à l’aide de

l’écran tactile tout en vérifiant l’image dans le

viseur. Pour effectuer cette opération,

retournez le panneau LCD et rabattez-le contre

le caméscope avec l’écran LCD tourné vers

l’extérieur.

Réglez le commutateur POWER sur

Effectuez cette opération à l’aide de l’écran tactile.

(

)

Retournez le panneau LCD et rabattez-

le contre le caméscope avec l’écran LCD

tourné vers l’extérieur, puis déployez le

viseur.

(

)

Appuyez sur

OFF. L’indicateur

PANEL OFF s’affiche à l’écran.

(

)

Appuyez sur OK. L’écran LCD est

désactivé.

(

)

Appuyez sur l’écran LCD en observant

les images dans le viseur. EXPOSURE,

OK,

ON et FADER (uniquement

si le commutateur POWER est réglé sur

CAMERA) s’affichent.

(

)

Appuyez sur l’écran LCD et

sélectionnez le paramètre souhaité, puis

appuyez sur

OK.

EXPOSURE :

Réglez l’exposition avec les touches

–/+.

FADER :

Appuyez sur FADER jusqu’à ce que

le mode de transition en fondu

souhaité s’affiche.

L’indicateur change comme suit :

FADER

M. FADER

BOUNCE

(pas d’indicateur)

MONOTONE

DOT*

WIPE*

OVERLAP*

* DCR-TRV22E/TRV33E uniquement

ON :

L’écran LCD s’allume.

DCR-TRV22E/TRV33E uniquement

Utilisation du viseur