Sony DCR TRV33E Operating Instructions - Page 244

Changing the menu settings Icon/item PLAYER SET1)/ VCR SET2) HiFi SOUND Mode z STEREO 1 2 AUDIO MIX -- Meaning POWER switch To play back the stereo tape or dual sound track tape with main and sub sound (p. 286) To play back the stereo tape with the left sound or the dual sound track tape with main sound To play back the stereo tape with the right sound or the dual sound track tape with sub sound To adjust the balance between stereo 1 and stereo 2 (p. 132) 1)/ 2) 1)/ 2) ST1 ST2 A/V t DV OUT3) z OFF To output digital images and sound in analog format using your camcorder ON To output analog images and sound in digital format using your camcorder (p. 238) NTSC PB z ON PAL TV To play back a tape recorded in the NTSC colour system on a PAL system TV NTSC 4.43 To play back a tape recorder in the NTSC colour system on a TV with the NTSC 4.43 mode LCD/VF SET LCD B.L. z BRT NORMAL To set the brightness on the LCD screen normal BRIGHT To brighten the LCD screen LCD COLOUR -- To adjust the colour on the LCD screen with r/R VF B.L. Low intensity High intensity z BRT NORMAL To set the brightness on the viewfinder screen to normal BRIGHT To brighten the viewfinder screen 1)/ 2) 1)/ 2) 3) 1)/ 2) 3) 1)/ 2) 3) 1) DCR-TRV12E/TRV14E 2) DCR-TRV19E/TRV22E/TRV33E 3) DCR-TRV22E/TRV33E Note on NTSC PB When you play back a tape on a Multi System TV, select the best mode while viewing the picture on the TV. Notes on LCD B.L. and VF B.L. •When you select BRIGHT, battery life is reduced by about 10 percent during recording. •When you use power sources other than the battery pack, BRIGHT is automatically selected. Even if you adjust LCD B.L., LCD COLOUR and VF B.L. The recorded picture will not be affected. 244