D-Link DES-3828 Product Manual - Page 119
show dot1v_protocol_group, config port dot1v ports, Protocol Group ID
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#delete dot1v_protocol_group group_id 100 Command: delete dot1v_protocol_group group_id 100 Success. DES-3800:admin# show dot1v_protocol_group Purpose Syntax Description Parameters Restrictions Display the protocols defined in a protocol group. show dot1v_protocol_group {group_id } Display the protocols defined in protocol groups. group_id - Specifies the ID of the group to be displayed if group id is not specified, all configured protocol groups will be displayed. None. Example usage: To display the protocol group ID 100. DES-3800:admin# show dot1v_protocol_group group_id 100 Command: show dot1v_protocol_group group_id 100 Protocol Group ID 100 Frame Type ---------EthernetII Protocol Value 0x86DD DES-3800:admin# config port dot1v ports Purpose Syntax Description Parameters Restrictions Assign the VLAN for untagged packets ingress from the portlist based on the protocol group configured config port dot1v ports | all [add protocol_group group_id vlan< vlan_name 32> | delete protocol_group [group_id |all] Assigns the VLAN for untagged packets ingress from the portlist based on the protocol group configured. This assignment can be removed by using delete protocol_group option - Specifies a range of ports to apply this command. - Group ID of the protocol group. - Vlan that is to be associated with this protocol group on this port Only Administrator or Operator-level users can issue this command. Example usage: The example is to assign VLAN marketing-1 for untaged ipv6 packet ingress from port 3. To configure the group ID 100 on port 3 to be associated with VLAN marketing-1. 115