D-Link DES-3828 Product Manual - Page 437

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config igmp_snooping multicast_vlan Purpose Syntax Description Parameters Restrictions Used to configure the parameter of the specific multicast VLAN. config igmp_snooping multicast_vlan {member_port | source_port | state [enable | disable] {force_agree} } The config igmp_snooping multicast_vlan command allows you to update member portlist and update source portlist. The member port are the untagged member of the multicast VLAN, and the source port will automatically become the tagged member of the multicast VLAN. To change the port-list, the new port-list will replace the previous port-list. vlan_name - The name of the multicast VLAN to be configured, Each multicast VLAN is given a name that can be up to 32 characters. member_port - A range of member ports to add to the multicast VLAN. They will become the untagged member port of the ISM VLAN. source_port - A range of member ports to add to the multicast VLAN. state - enable or disable multicast VLAN for the chosen VLAN. force_agree - When force_agree is specified, the config command will be executed immediatedly without further confirmation. The member port list and source port list could not overlap. The multicast vlan must be created first before configuration. Only Administrator or Operator-level users can issue this command. Example usage: To config igmp_snoop multicast_vlan: DES-3800:admin# config igmp_snooping multicast_vlan v1 member_port 1,3 source_port 2 state enable Command: config igmp_snooping multicast_vlan v1 member_port 1,3 source_port 2 state enable Success. DES-3800:admin# 433