D-Link DES-3828 Product Manual - Page 368
Limited Multicast IP Address Commands, create mcast_filter_profile
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 54 LIMITED MULTICAST IP ADDRESS COMMANDS The Limited Multicast IP Address commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create mcast_filter_profile profile_id config mcast_filter_profile profile_id delete mcast_filter_profile profile_id show mcast_filter_profile config limited_multicast_addr ports show limited_multicast_addr config max_mcast_group ports show max_mcast_group ports Parameters description < value 1-24> { description | [add | delete ] } { profile_id } { [add | delete ] profile_id | access [permit | deny]} { ports } max_group {ports } Each command is listed, in detail, in the following sections. create mcast_filter_profile Purpose Syntax Description Parameters Restrictions This command creates a multicast address profile. create mcast_filter_profile profile_id description This command configures a multicast address profile. Mutliple ranges of multicast addresses can be defined in the profile. profile_id - ID of the profile. Range is 1 to24. description - Provides a meaningful description for the profile. Only Administrator or Operator-level users can issue this command. Usage Example: To create a multicast filter profile: DES-3800:admin# create mcast_filter_profile profile_id 2 description MOD Command: create mcast_filter_profile profile_id 2 description MOD Success. DES-3800:admin# 364