D-Link DES-3828 Product Manual - Page 222
create ospf aggregation, Total Entries: 0
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Host Address Metric ------ Total Entries: 0 DES-3800:admin# Area ID TOS create ospf aggregation Purpose Syntax Description Parameters Restrictions Used to configure OSPF area aggregation settings. create ospf aggregation lsdb_type summary {advertise [enable | disable]} This command is used to create an OSPF area aggregation. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − The type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Only Administrator or Operator-level users can issue this command. Usage example: To create an OSPF area aggregation: DES-3800:admin#create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success. DES-3800:admin# delete ospf aggregation Purpose Syntax Description Parameters Restrictions Used to delete an OSPF area aggregation configuration. delete ospf aggregation lsdb_type summary This command is used to delete an OSPF area aggregation configuration. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. Only Administrator or Operator-level users can issue this command. Usage example: To configure the OSPF area aggregation settings: 218