D-Link DES-3828 Product Manual - Page 213

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 32 MD5 COMMANDS The MD5 configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create md5 key config md5 key delete md5 key show md5 Parameters {key } Each command is listed, in detail, in the following sections. create md5 key Purpose Syntax Description Parameters Restrictions Used to create a new entry in the MD5 key table. create md5 key This command is used to create an entry for the MD5 key table. − The MD5 key ID. The user may enter a key ranging from 1 to 255. − An MD5 password of up to 16 bytes. Only Administrator or Operator-level users can issue this command. Usage example To create an entry in the MD5 key table: DES-3800:admin# create md5 key 1 dlink Command: create md5 key 1 dlink Success. DES-3800:admin# config md5 key Purpose Syntax Description Parameters Restrictions Used to enter configure the password for an MD5 key. config md5 key This command is used to configure an MD5 key and password. − The previously defined MD5 key ID. − The user may change the MD5 password for the md5 key. A new password of up to 16 characters can be created. Only Administrator or Operator-level users can issue this command. Usage example To configure an MD5 Key password: DES-3800:admin#config md5 key 1 taboo Command: config md5 key 1 taboo 209