D-Link DES-3828 Product Manual - Page 145

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin# show radius Purpose Syntax Description Parameters Restrictions Used to display the current RADIUS configurations on the Switch. show radius The show radius command is used to display the current RADIUS configurations on the Switch. None. Only Administrator-level users can issue this command. Example usage: To display RADIUS settings on the Switch: DES-3800:admin#show radius Command: show radius Index ----1 2 3 IP Address ----------10.1.1.1 20.1.1.1 30.1.1.1 Auth-Port Number --------1812 1800 1812 Acct-Port Number --------1813 1813 1813 Status ------Active Active Active Key ------switch des3226 dlink Total Entries : 3 DES-3800:admin# create 802.1x guest_vlan Purpose Syntax Description Parameters Restrictions Used to configure a pre-existing VLAN as a 802.1x Guest VLAN. create 802.1x guest_vlan The create 802.1x guest_vlan command is used to configure a predefined VLAN as a 802.1x Guest VLAN. Guest 802.1X VLAN clients are those who have not been authorized for 802.1x or they haven't yet installed the necessary 802.1x software, yet would still like limited access rights on the Switch. - Enter an alphanumeric string of no more than 32 characters to define a pre-existing VLAN as a 802.1x Guest VLAN. This VLAN must have first been created with the create vlan command mentioned earlier in this manual. Only Administrator or Operator-level users can issue this command. This VLAN is only supported for port-based 802.1x and must have already been previously created using the create vlan command. Only one VLAN can be set as the 802.1x Guest VLAN. Example usage: To configure a previously created VLAN as a 802.1x Guest VLAN for the Switch. DES-3800:admin#create 802.1x guest_vlan Trinity Command: create 802.1x guest_vlan Trinity Success. 141