D-Link DES-3828 Product Manual - Page 74

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To display the packets analysis for port 2: DES-3800:admin#show packet ports 2 Command: show packet ports 2 Port number : 2 Frame Size Frame Counts 64 0 65-127 0 128-255 0 256-511 0 512-1023 0 1024-1518 0 Frames/sec ---------0 0 0 0 0 0 Frame Type ---------RX Bytes RX Frames TX Bytes TX Frames Total -----0 0 0 0 Total/sec --------- 0 0 0 0 Unicast RX 0 0 Multicast RX 0 0 Broadcast RX 0 0 CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh show error ports Purpose Syntax Description Parameters Restrictions Used to display the error statistics for a range of ports. show error ports This command will display all of the packet error statistics collected and logged by the Switch for a given port list. − Specifies a port or range of ports to be displayed. None. Example usage: To display the errors of the port 3 of module 1: DES-3800:admin#show error ports 3 Command: show error ports 3 Port number : 1 ---------CRC Error Undersize Oversize Fragment Jabber Drop Pkts RX Frames 19 0 0 0 11 20837 Excessive Deferral CRC Error Late Collision Excessive Collision Single Collision Collision TX Frames --------0 0 0 0 0 0 CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh show utilization Purpose Syntax Description Used to display real-time port and cpu utilization statistics. show utilization [cpu | ports {}] This command will display the real-time port and CPU utilization 70