D-Link DES-3828 Product Manual - Page 295
delete stp instance_id, config stp priority, Command: delete stp instance_id 2
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:admin# delete stp instance_id Purpose Syntax Description Parameters Restrictions Used to delete a STP instance ID from the Switch. delete stp instance_id This command allows the user to delete a previously configured STP instance ID from the Switch. - Enter a value between 1 and 4 to identify the Spanning Tree instance on the Switch. Only Administrator or Operator-level users can issue this command. Example usage: To delete stp instance ID 2 from the Switch. DES-3800:admin#delete stp instance_id 2 Command: delete stp instance_id 2 Success. DES-3800:admin# config stp priority Purpose Syntax Description Parameters Restrictions Used to update the STP instance configuration. config stp priority instance_id This command is used to update the STP instance configuration settings on the Switch. The MSTP will utilize the priority in selecting the root bridge, root port and designated port. Assigning higher priorities to STP regions will instruct the Switch to give precedence to the selected instance_id for forwarding packets. The lower the priority value set, the higher the priority. priority - Select a value between 0 and 61440 to specify the priority for a specified instance id for forwarding packets. The lower the value, the higher the priority. This entry must be divisible by 4096. instance_id - Enter the value corresponding to the previously configured instance id for which to set the priority value. An instance id of 0 denotes the default instance_id (CIST) internally set on the Switch. Only Administrator or Operator-level users can issue this command. Example usage: To set the priority value for instance_id 2 as 4096: DES-3800:admin#config stp priority 4096 instance_id 2 Command : config stp priority 4096 instance_id 2 Success. 291