D-Link DES-3828 Product Manual - Page 183

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete iproute Purpose Syntax Description Parameters Restrictions Used to delete an IP route entry from the Switch's IP routing table. delete iproute [default | ] {[primary | backup]} This command will delete an existing entry from the Switch's IP routing table. − IP address and netmask of the IP interface that is the destination of the route. The address and mask information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). − The gateway IP address for the next hop router. [primary | backup] − The user may choose between Primary and Backup. If the Primary Static/Default Route fails, the Backup Route will support the entry. Please take note that the Primary and Backup entries cannot have the same Gateway. Only Administrator or Operator-level users can issue this command. Example usage: To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the routing table: DES-3800:admin#delete iproute 10.48.74.121/8 10.1.1.254 Command: delete iproute 10.48.74.121/8 10.1.1.254 Success. DES-3800:admin# show iproute Purpose Syntax Description Parameters Restrictions Used to display the Switch's current IP routing table. show iproute {} {[rip | ospf]} This command will display the Switch's current IP routing table. −The IP address and netmask of the IP interface that is the destination of the route. The address and mask information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). rip - Use this parameter to display RIP IP route entries. ospf - Use this parameter to display OSPF IP route entries. None. Example usage: To display the contents of the IP routing table: 179