D-Link DES-3828 Product Manual - Page 164

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete access_profile Purpose Syntax Description Parameters Restrictions Used to delete a previously created access profile. delete access_profile profile_id [ | all] The delete access_profile command is used to delete a previously created access profile on the Switch. profile_id − Enter an integer between 1 and 255 that is used to identify the access profile that will be deleted with this command. This value is assigned to the access profile when it is created with the create access_profile command. all - Entering this parameter will delete all access profiles currently configured on the Switch. Only Administrator or Operator-level users can issue this command. Example usage: To delete the access profile with a profile ID of 1: DES-3800:admin# delete access_profile profile_id 1 Command: delete access_profile profile_id 1 Success. DES-3800:admin# show access_profile Purpose Syntax Description Parameters Restrictions Used to display the currently configured access profiles on the Switch. show access_profile {profile_id } The show access_profile command is used to display the currently configured access profiles. profile_id − Enter an integer between 1 and 255 that is used to identify the access profile that will be viewed with this command. This value is assigned to the access profile when it is created with the create access_profile command. Entering this command without the profile_id parameter will command the Switch to display all access profile entries. None. Example usage: To display all of the currently configured access profiles on the Switch: DES-3800:admin#show access_profile Command: show access_profile Access Profile Table Access Profile ID: 1 TYPE : Ethernet Owner : ACL Masks : VLAN Access ID : 1 Mode: Permit 160