D-Link DES-3828 Product Manual - Page 144
config radius delete, config radius
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config radius delete Purpose Syntax Description Parameters Restrictions Used to delete a previously entered RADIUS server configuration. config radius delete The config radius delete command is used to delete a previously entered RADIUS server configuration. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. Only Administrator-level users can issue this command. Example usage: To delete previously configured RADIUS server communication settings: DES-3800:admin#config radius delete 1 Command: config radius delete 1 Success. DES-3800:admin# config radius Purpose Syntax Description Parameters Restrictions Used to configure the Switch's RADIUS settings. config radius {ipaddress | key | auth_port | acct_port } The config radius command is used to configure the Switch's RADIUS settings. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. ipaddress − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. • − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only Administrator-level users can issue this command. Example usage: To configure the RADIUS settings: DES-3800:admin#config radius 1 10.48.74.121 key dlink default Command: config radius 1 10.48.74.121 key dlink default Success. 140