D-Link DES-3828 Product Manual - Page 243
config mac_notification, Command: disable mac_notification
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#disable mac_notification Command: disable mac_notification Success. DES-3800:admin# config mac_notification Purpose Syntax Description Parameters Restrictions Used to configure MAC address notification. config mac_notification {interval | historysize } MAC address notification is used to monitor MAC addresses learned and entered into the FDB. interval - The time in seconds between notifications. The user may choose an interval between 1 and 2,147,483,647 seconds. historysize - The maximum number of entries listed in the history log used for notification. Only Administrator or Operator-level users can issue this command. Example usage: To configure the Switch's MAC address table notification global settings: DES-3800:admin#config mac_notification interval 1 historysize 500 Command: config mac_notification interval 1 historysize 500 Success. DES-3800:admin# config mac_notification ports Purpose Syntax Description Parameters Restrictions Used to configure MAC address notification status settings. config mac_notification ports [ | all] [enable | disable] MAC address notification is used to monitor MAC addresses learned and entered into the FDB. - Specify a port or range of ports to be configured. all - Entering this command will set all ports on the system. [enable | disable] - These commands will enable or disable MAC address table notification on the Switch. Only Administrator or Operator-level users can issue this command. Example usage: To enable port 7 for MAC address table notification: DES-3800:admin#config mac_notification ports 7 enable Command: config mac_notification ports 7 enable Success. 239