Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 112
VLAN Membership Configuration, Switching, Advanced, VLAN Membership, Tagged
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches VLAN Membership Configuration Use this page to configure VLAN Port Membership for a particular VLAN. You can select the Group operation through this page. To display the VLAN Membership Configuration page, click Switching> VLAN > Advanced > VLAN Membership. To configure VLAN membership: 1. From the VLAN ID field, select the VLAN to which you want to add ports. 2. Click the orange bar below the VLAN Type field to display the physical ports on the switch. 3. Click the lower orange bar to display the LAGs on the switch. 4. To select the port(s) or LAG(s) to add to the VLAN, click the square below each port or LAG. You can add each interface as a tagged (T) or untagged (U) VLAN member. • Tagged: Frames transmitted from this port are tagged with the port VLAN ID. • Untagged: Frames transmitted from this port are untagged. Each port can be an untagged member of only one VLAN. By default, all ports are an untagged member of VLAN 1. In the following figure, ports g6, g7, and g8 are being added as tagged members to VLAN 2. 112