Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 96
VLAN ID, IP Address, Delete, Clear, Refresh, Cancel
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To configure static DHCP bindings in the database: 1. Select the interface to add a static binding to into the DHCP snooping database. 2. Specify the MAC address for the binding to be added. This is the key to the binding database. 3. In the VLAN ID field, select the from the VLANs that exist on the switch for the binding rule. The range of the VLAN ID is (1 to 4093). 4. In the IP Address field, specify a valid IP Address for the binding rule. 5. Click Add to add the DHCP snooping binding entry into the database. 6. Click Delete to delete the selected static entries from the database. 7. Click Clear to delete all DHCP Snooping binding entries. 8. Click Refresh to refresh the data on the screen with the latest DHCP Snooping Dynamic Binding information. 9. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. For DHCP Snooping Dynamic Binding Configuration table shows the bindings that have been learned on the switch through DHCP snooping. The following table describes the available fields. Field Interface MAC Address VLAN ID IP Address Lease Time Description Displays the interface on which the binding was learned. Displays the MAC address for the binding in the binding database. Displays the VLAN for the binding entry in the binding database. The range of the VLAN ID is 1 to 4093. Displays the IP Address for the binding entry in the binding database. Displays the remaining Lease time for the Dynamic entries. 96