Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 198

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Change Password Use the page to change the login password. To display the page, click Security > Management Security > User Configuration > Change Password. To change the login password for the management interface: 1. Specify the current password in the Old Password. The entered password will be displayed in asterisks (*). Passwords are 1-20 alphanumeric characters in length and are case sensitive. 2. Enter the new password. It will not display as it is typed, and only asterisks (*) will show on the screen. Passwords are 1-20 alphanumeric characters in length and are case sensitive. 3. To confirm the password, enter it again to make sure you entered it correctly. This field will not display, but will show asterisks (*). 4. Use the Reset Password field to reset the password to the default value. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 6. If you make changes to the page, click Apply to apply the changes to the system. 7. Click Refresh to update the screen with the current information. Note: In the case of a lost password, press the Factory Default Reset button on the front panel for more than one second to restore the factory default. The reset button will only reboot the device. 198