Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 193

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 2. Select the queue to which packets of this policy-class will be assigned. 3. Configure the policy attributes:. • Drop. Select this option to drop packets for this policy-class. • Mark CoS. Enter the specified Class of Service queue number to mark all packets for the associated traffic stream with the specified class of service value in the priority field of the 802.1p header. If the packet does not already contain this header, one is inserted. The CoS value is an integer from 0-7. • Mark IP Precedence. Use this attribute to mark all packets for the associated traffic stream with the IP Precedence value you enter in the IP Precedence Value field. • Mark IP DSCP. Use this attribute to mark all packets for the associated traffic stream with IP DSCP value you choose from the menu. If you select Other, enter a custom value in the DSCP Value field that appears. • Simple Policy. Use this attribute to establish the traffic policing style for the specified class. The simple form of the policy command uses a single data rate and burst size, resulting in two outcomes: confirm and violate. 4. If you select the Simple Policy attribute, you can configure the following fields: • Color Mode. Color Aware mode requires the existence of one or more color classes that are valid for use with this policy instance; otherwise, the color mode is color blind, which is the default. • Color Conform Class. A valid color class contains a single, non-excluded match criterion for one of the following fields (provided the field does not conflict with the classifier of the policy instance itself). • Color Conform Mode. The match-criteria of the color Conform class. • Committed Rate. The committed rate is specified in kilobits-per-second (Kbps) and is an integer from 1-4294967295. • Committed Burst Size. The committed burst size is specified in kilobytes (KB) and is an integer from 1-128. 193