Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 16
Web Access, Web Browser Access
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches WARNING: When you change the IP address of your administrative system, you will loose your connection to the rest of the network. Be sure to write down your current network address settings before you change them. To modify the network settings on your administrative system: 1. On your PC, access the MS Windows operating system TCP/IP Properties. 2. Set the IP address of the administrative system to an address in the 192.168.0.0 network, such as 192.168.0.200. The IP address must be different from that of the switch but within the same subnet. 3. Click OK. To configure a static address on the switch: 1. Use a straight-through cable to connect the Ethernet port on the administrative system directly to any port on the GS728TS, GS728TPS, GS752TS, or GS752TPS. 2. Open a Web browser on your PC and connect to the management interface as described in Web Access on page 16. 3. Change the network settings on the switch to match those of your network (this procedure is described in IP Configuration on page 35). After you change the network settings on the switch, return the network configuration on your administrative system to the original settings. Web Access To access the GS728TS, GS728TPS, GS752TS, or GS752TPS management interface, use one of the following methods: • From the Smart Control Center, select the switch and click Web Browser Access. • Open a Web browser and enter the IP address of the switch in the address field. You must be able to ping the IP address of the GS728TS, GS728TPS, GS752TS, or GS752TPS management interface from your administrative system for Web access to be available. If you used the Smart Control Center to set up the IP address and subnet mask, either with or without a DHCP server, use that IP address in the address field of your Web browser. If you did not change the IP address of the switch from the default value, enter 192.168.0.239 into the address field. 16