Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 217

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Access Rule Configuration Use the Access Rule Configuration page to configure the rules about what systems can access the GS728TS, GS728TPS, GS752TS, or GS752TPS Web interface and what protocols are allowed. To access the Access Rule Configuration page, click Security > Access, and then click the Access Control > Access Rule Configuration link. Before you create access rules, make sure: • An access profile exists. • The access profile is deactivated. To configure access profile rules: 1. To add an access profile rule, configure the following settings and click Add. • Rule Type: Specify whether the rule permits or denies access to the GS728TS, GS728TPS, GS752TS, or GS752TPS management interface. • Select Permit to allow access to the management interface for traffic that meets the criteria you configure for the rule. Any traffic that does not meet the rules is denied. • Select Deny to prohibit access to the management interface for traffic that meets the criteria you configure for the rule. Any traffic that does not meet the rules is allowed access to the switch. Unlike MAC ACLs and IP ACLs, there is no implied deny all rule at the end of the rule list. • Service Type. Select the type of service to allow or prohibit from accessing the switch management interface: • SNMP • HTTP • HTTPS 217