Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 272
FLASH Log Configuration, Cancel, Monitoring, Logs tab, FLASH Log, Admin Status, Enable, Disable
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches • Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. FLASH Log Configuration The FLASH log is a log that is stored in persistent storage, which means that the log messages are retained across a switch reboot. • The first log type is the system startup log. The system startup log stores the first N messages received after system reboot. This log always has the log full operation attribute set to stop on full and can store up to 32 messages. • The second log type is the system operation log. The system operation log stores the last N messages received during system operation. This log always has the log full operation attribute set to overwrite. This log can store up to 1000 messages. Either the system startup log or the system operation log stores a message received by the log subsystem that meets the storage criteria, but not both. On system startup, if the startup log is configured, it stores messages up to its limit. The operation log, if configured, then begins to store the messages. Use the FLASH Log Configuration page to enable or disable persistent logging and to set the severity filter. To access the FLASH Log Configuration page, click the Monitoring > Logs tab, and then click the FLASH Log link. To configure the FLASH Log settings: 1. Use the radio buttons in the Admin Status field to determine whether to log messages to persistent storage. • Enable: Enables persistent logging. • Disable: Prevents the system from logging messages in persistent storage. 272