Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 153
Querier Configuration, Querier Admin Mode
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To configure the Multicast Router VLAN: 1. Use the Interface menu to select the interface to configure. 2. Enter the VLAN ID in the VLAN ID field for which the Multicast Router Mode is to be Enabled or Disabled. 3. Use the Multicast Router field to enable or disable Multicast Router on the selected interface. 4. Click Apply to apply the new settings to the switch. Configuration changes take effect immediately 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Querier Configuration Use this page to enable or disable the MLD Querier Configuration feature, specify the IP address of the router to perform the querying, and configure the related parameters. To access this page, click Switching Multicast MLD Snooping Querier Configuration. To configure the Querier settings: 1. From the Querier Admin Mode field, enable or disable the administrative mode for MLD Snooping Querier. 2. In the Querier Address field, specify the Snooping Querier Address to be used as source address in periodic MLD queries. This address is used when no address is configured on the VLAN on which query is being sent. The supported IPv6 formats are x:x:x:x:x:x:x:x and x::x. 3. In the MLD Version field, the MLD protocol version used in periodic MLD queries is displayed. The supported MLD Version is 1. 153