Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 41
Time Configuration, System, Management > Time, SNTP Global, Local, Time Zone, Apply
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Time Configuration Use the Time Configuration page to view and adjust date and time settings. To display the Time Configuration page, click System > Management > Time > SNTP Global Configuration. To configure the time by using the CPU clock cycle as the source: 1. From the Clock Source field, select Local. 2. In the Date field, enter the date in the DD/MM/YYYY format. 3. In the Time field, enter the time in HH:MM:SS format. Note: If you do not enter a date and time, the switch will calculate the date and time using the CPU's clock cycle. When the Clock Source is set to Local, the Time Zone field is grayed out (disabled). 4. Click Apply to send the updated configuration to the switch. Configuration changes occur immediately. 41