Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 82
LLDP Port Settings, System > LLDP > Advanced > LLDP Port
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches • TLV Advertised Interval. Specify the interval at which frames are transmitted. The default is 30 seconds, and the valid range is 5-32768 seconds. • Hold Multiplier. Specify multiplier on the transmit interval to assign to Time-to-Live (TTL). The default is 4 seconds, and the range is 2-10. • Reinitializing Delay. Specify the delay before a reinitialization. The default is 2 seconds, and the range is 1-10 seconds. • Transmit Delay. Specify the interval for the transmission of notifications. The default is 5 seconds, and the range is 5-3600 seconds. 2. To change the LLDP-MED properties in the Fast Start Duration field, specify the number of LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized, which occurs when a new endpoint device links with the LLDP-MED network connectivity device. The default value is 3 times, and the range is from 1-10. 3. Click Apply to apply the new settings to the system. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click Refresh to update the screen with the current information. LLDP Port Settings Use the LLDP Port Settings page to specify LLDP parameters that are applied to a specific interface. To display the LLDP Port Settings page, click System > LLDP > Advanced > LLDP Port Settings. 82