Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 139
Enable, Disable, Apply, Cancel, To con IGMP Snooping
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To configure IGMP Snooping: 1. Enable or disable IGMP Snooping on the switch. • Enable. The switch snoops all IGMP packets it receives to determine which segments should receive packets directed to the group address. • Disable. The switch does not snoop IGMP packets. 2. Enable or disable the validation of IGMP IP headers. • Enable. The switch checks the IGMP IP header for valid Router Alert option, ToS, and TTL information. • Disable. The switch does not check the IGMP IP header for Router Alert option, ToS, and TTL information. 3. Specify whether to block unknown multicast addresses • Enable. The switch drops all packets with an unknown multicast MAC address in the destination field. • Disable. The switch forwards multicast packets with an unknown multicast MAC address in the destination field. 4. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch 139