Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 157
Search By, MAC Address, VLAN ID, Interface, Clear, Refresh, from the menu
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To search for an entry in the MAC Address Table: 1. Use the Search By field to search for MAC Addresses by MAC Address, VLAN ID, or Interface. • MAC Address: Select MAC Address from the menu and enter a six-byte hexadecimal MAC address in two-digit groups separated by colons, then click Go. If the address exists, that entry will be displayed. An exact match is required. • VLAN ID: Select VLAN ID from the menu, enter the VLAN ID, for example, 100. Then click Go. If any entries with that VLAN ID exist they are displayed. • Interface: Select Interface from the menu, enter the interface ID and click Go. The interface format is /g. If any entries learned on that interface exist, they are displayed. 2. Click Clear to clear Dynamic MAC Addresses in the table. 3. Click Refresh to redisplay the page to show the latest MAC Addresses. The following table describes the information available for each entry in the address table. Field VLAN ID MAC Address Interface Status Description The VLAN ID associated with the MAC address. A unicast MAC address for which the switch has forwarding and/or filtering information. The format is a six-byte MAC address with each byte separated by colons. For example, 00:0F:89:AB:CD:EF. The port where this address was learned: that is, this field displays the port through which the MAC address can be reached. The status of this entry. The possible values are: • Static: The entry was added when a static MAC filter was defined. • Learned: The entry was learned by observing the source MAC addresses of incoming traffic, and is currently in use. • Management: The system MAC address, which is identified with interface c1. 157