Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 33
Slot Information, System, Management
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Field Date & Time System Up Time Base MAC Address Fan Status Table Unit ID Fan 1 and Fan 2 Versions Table Unit No. Model Name Boot Version Software Version Description The current date and time. Displays the number of days, hours, and minutes since the last system restart. The universally assigned network address. Identifies the unit number assigned to the stack member. Up to six units are supported in a stack, and the table contains separate columns for each possible unit in the stack, whether the units are present or not. These fans remove the heat generated by the power, CPU and other chipsets, and allow the chipsets to work normally. Fan status has three possible values: OK, Failure, Not Present. If the Fan 1 and Fan 2 entries for a Unit ID are blank, then no switch with that unit number is present in the stack. Identifies the unit number assigned to the stack member. The model name of the switch. The boot code version of the switch. The software version of the switch. Slot Information Use this page to display details of the different slots in the different units in the stack. The page also displays information about the card types and switch models supported in the stack. To display the Slot Information page, click System Management Slot Information. A screen similar to the following is displayed. 33