Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 215

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 3. In the TFTP Server IP field, specify the address of the TFTP server. The address can be an IP address in standard x.x.x.x format or a hostname. The hostname must start with a letter of the alphabet. Make sure that the software image or other file to be downloaded is available on the TFTP server. 4. In the Remote File Path field, specify the path on the TFTP server where the file is located. You may enter up to 96 characters. 5. In the Remote File Name field, specify the name of the file to download. You may enter up to 32 characters. 6. Select the Start File Transfer check box. 7. Click Apply to start the transfer. A status message displays during the transfer and upon successful completion of the transfer. 8. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Access Profile Configuration Use the Access Profile Configuration page to configure settings that control management access to the switch. Access profile configuration requires three steps: 1. Use the Access Profile Configuration page to create an access profile. To add rules to the profile, the access profile must be deactivated, which is the default setting. 2. Use the Access Rule Configuration page to add one or more access rules to the profile. 3. Return to the Access Profile Configuration page to activate the profile. To access the Access Profile Configuration page, click Security > Access, and then click the Access Control > Access Profile Configuration link. 215