Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 30

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Interface Naming Convention The GS728TS, GS728TPS, GS752TS, and GS752TPS switches software supports physical and logical interfaces. Interfaces are identified by their type and the interface number. The physical ports are gigabit interfaces and are numbered on the front panel. You can configure the logical interfaces by using the software. The following table describes the naming convention for all interfaces available on the switch. Table 2. Interface Naming Conventions Interface Physical Link Aggregation Group (LAG) CPU Management Interface Description Example The physical ports are gigabit Ethernet interfaces and are numbered sequentially starting from one. The number before the slash indicates the unit number of the stack member. 1/g1, 1/g2, 1/g3 3/g21, 3/g22 LAG interfaces are logical interfaces that are only used for bridging functions. l1, l2, l3 This is the internal switch interface responsible c1 for the switch base MAC address. This interface is not configurable and is always listed in the MAC Address Table. 30