Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 154
Querier VLAN Configuration, Query Interval, Querier Expiry Interval, Cancel, Apply, Switching
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 4. In the Query Interval field, specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1-1800 seconds. The default value is 60. 5. In the Querier Expiry Interval field, specify the time interval in seconds after which the last querier information is removed. The Querier Expiry Interval must be a value in the range of 60-300 seconds. The default value is 60. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. Click Apply to apply the new settings to the switch. Configuration changes take effect immediately Querier VLAN Configuration Use this page to configure MLD queriers for use with VLANs on the network. To access this page, click Switching Multicast MLD Snooping Querier Querier VLAN Configuration. The following table describes the information available on the Querier VLAN Status page. Field Description VLAN ID Specifies the VLAN ID on which MLD Snooping Querier is administratively enabled and VLAN exists in the VLAN database. Querier Election Participate Mode Enable or Disable the MLD Snooping Querier participate in election mode. When this mode is disabled, up on seeing other querier of same version in the VLAN, the snooping querier move to non querier state. Only when this mode is enabled, the snooping querier will participate in querier election where in the least IP address will win the querier election and operates as the querier in that VLAN. The other querier moves to non-querier state. 154