Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 255
VLAN Binding Table, Security, ACL > Advanced, Vlan Binding, Table, VLAN ID, Direction
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches VLAN Binding Table Use the VLAN Binding Table page to associate configured ACLs with VLANs. To display the VLAN Binding Table page, click Security ACL > Advanced Vlan Binding Table. In the ACL Binding area, enter the values in the following fields: 1. In the VLAN ID field, specify a VLAN ID for ACL mapping. 2. In the Direction field, specify the direction of packet traffic affected by the MAC ACL, which can be Inbound or blank. 3. In The Sequence Number field, specify the sequence number of the access lists. This field displays an optional sequence number may be specified to indicate the order of this access list relative to other access lists already assigned to this VLAN and direction. A lower number indicates higher precedence order. If a sequence number is already in use for this VLAN and direction, the specified access list replaces the currently attached access list using that sequence number. If the sequence number is not specified by the user (i.e., the value is 0), a sequence number that is one greater than the highest sequence number currently in use for this VLAN and direction will be used. Valid range is (1 to 4294967295). 4. In the ACL Type field, specify the type of ACL. Valid ACL types are: • IP ACL • MAC ACL • IPv6 ACL 5. The ACL ID field displays all the ACLs configured, depending on the ACL Type selected. 6. To add a VLAN ID to the selected ACL ID, click Add. 7. To remove the VLAN ID to the selected ACL ID, click Delete. 8. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 255