Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 67
Con d Stack Mode, Stack, Ethernet, Apply, Cancel, Refresh
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To configure the mode of the stack ports: 1. Select the check box associated with the unit and port to configure: 2. From the Configured Stack Mode field, select the operating mode: • Stack. The port connects to the stack port on another stack member. This is the default value. • Ethernet. The port operates as a standard switch port that receives and transmits network traffic 3. Click Apply to apply the new settings to the system. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click Refresh to update the screen with the current information. The following table describes Stack Port Configuration fields. Field Unit ID Port Running Stack Mode Link Status Link Speed (Gbps) Transmit Data Rate (Mbps) Transmit Error Rate Total Transmit Errors Data Rate (Mbps) Receive Error Rate Total Receive Errors Description Displays the unit. Displays the stackable interfaces on the given unit. Displays the run-time mode of the stackable interface. Displays the link status (UP/DOWN) of the port. Displays the maximum speed of the stacking port. Displays the approximate transmit rate on the stacking port. Displays the number of errors in transmit packets per second. Displays the total number of errors in transmit packets since boot. The counter may wrap. Displays the approximate receive rate on the stacking port. Displays the number of errors in receive packets per second. Displays the total number of errors in receive packets since boot. The counter may wrap. 67