Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 142

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches The following table describes the fields in the IGMP Snooping Table. Field MAC Address VLAN ID Type Description Interface Description A multicast MAC address for which the switch has forwarding and/or filtering information. The format is 6 two-digit hexadecimal numbers that are separated by colons, for example, 01:00:5e:45:67:89. A VLAN ID for which the switch has forwarding and filtering information. This displays the type of the entry. Static entries are those that are configured by the end user. Dynamic entries are added to the table as a result of a learning process or protocol. The text description of this multicast table entry. Possible values are Management Configured, Network Configured, and Network Assisted. The list of interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the associated address. Use the buttons at the bottom of the page to perform the following actions: • Click Clear to clear one or all of the IGMP Snooping entries. • Click Refresh to reload the page and display the most current information. • Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. IGMP Snooping VLAN Configuration Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping settings for VLANs on the system. To access the IGMP Snooping VLAN Configuration page, click Switching> Multicast > IGMP Snooping > IGMP Snooping VLAN Configuration. 142