Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 292
Troubleshooting, Ping, Maintenance, Hostname/IP Address, Count, Interval, Cancel
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Troubleshooting The Troubleshooting menu contains links to the following options: • Ping on page 292 • Ping IPv6 on page 293 • Traceroute on page 294 Ping Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can use this feature to check whether the switch can communicate with a particular network host. To access the Ping page, click Maintenance > Troubleshooting > Ping. To configure the settings and ping a host on the network: 1. In the Hostname/IP Address field, specify the IP address or the hostname of the station you want the switch to ping. The initial value is blank. This information is not retained across a power cycle. 2. Optionally, configure the following settings: • Count. Specify the number of pings to send. The valid range is 1-15. • Interval. Specify the number of seconds between pings sent. The valid range is 1-60. • Size. Specify the size of the ping (ICMP) packet to send. The valid range is 0-65507. 3. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest value of the switch. 292