Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 209

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches • RADIUS: The user's ID and password will be authenticated using the RADIUS server. If you select RADIUS or TACACS+ as the first method and an error occurs during the authentication, the switch uses Method 2 to authenticate the user. • TACACS+: The user's ID and password will be authenticated using the TACACS+ server. If you select RADIUS or TACACS+ as the first method and an error occurs during the authentication, the switch attempts user authentication Method 2. • None: The authentication method is unspecified. This option is only available for Method 2 and Method 3. 3. Use the menu in the 2 column to select the authentication method, if any, that should appear second in the selected authentication login list. This is the method that will be used if the first method times out. If you select a method that does not time out as the second method, the third method will not be tried. This parameter will not appear when you first create a new login list. 4. Use the menu in the 3 column to select the authentication method, if any, that should appear third in the selected authentication login list. This parameter will not appear when you first create a new login list. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 6. If you make changes to the page, click Apply to apply the changes to the system. Dot1x Authentication List Use the Dot1x Authentication List page to configure the authentication method(s) a host connected to a switch port must use when attempting to access the network. To access the Dot1x Authentication List page, click Security > Management Security > Authentication List, and then click the Dot1x Authentication List link. To change the authentication method for the dot1xList: 1. Select the check box next to the dot1xList name 209