Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 150
MLD VLAN Configuration, Fast Leave Admin Mode
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 9. Use the Fast Leave Admin Mode field to select the Fast Leave mode for a particular interface from the menu. The default is Disable. 10. Click Apply to apply the new settings to the switch. Configuration changes take effect immediately 11. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. MLD VLAN Configuration MLD Snooping can be enabled on a per VLAN basis. It is necessary to keep track of the interfaces that are participating in a VLAN in order to apply or remove configurations. To access the MLD VLAN Configuration page, click Switching Multicast MLD Snooping MLD VLAN Configuration. To configure the MLD VLAN: 1. Set the VLAN IDs for which MLD Snooping is enabled in the VLAN ID field. 2. Enable MLD Snooping for the specified VLAN ID in the Admin Mode field. 3. Enable or disable the MLD Snooping Fast Leave Mode for the specified VLAN ID in the Fast Leave Admin Mode field. 4. Use the Group Membership Interval field to set the value for group membership interval of MLD Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600. 5. Use the Maximum Response Time field to set the amount of time, in seconds, that a switch will wait after sending a query on the VLAN because it did not receive a report for a particular group in that interface. The minimum response time value is 1, and the maximum value must be at least one second less than the value configured for the Group Membership Interval. 150