Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 113
Port VLAN ID Configuration, Group Operations, Untag All, Remove All, Cancel, Apply, Switching
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 5. Use the Group Operations field to select all the ports and configure them. Possible values are: • Untag All: Select all the ports on which all frames transmitted from this VLAN will be untagged. All the ports will be included in the VLAN. • Tag All: Select the ports on which all frames transmitted for this VLAN will be tagged. All the ports will be included in the VLAN. • Remove All: This selection has the effect of excluding all ports from the selected VLAN. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take place immediately. Port VLAN ID Configuration The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. PVIDs have the following requirements: • All ports must have a defined PVID. • If no other value is specified, the default VLAN PVID is used. To access the Port PVID Configuration page, click Switching> VLAN > Advanced > Port PVID Configuration. To configure PVID information: 1. To configure PVID settings for a physical port, click the unit ID of the stack member with the ports to configure. 2. To configure PVID settings for a Link Aggregation Group (LAG), click LAGS. 113