Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 230
Port Security Configuration, Security, Traffic Control, Port Security, Cancel, Apply, Refresh
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches Port Security Configuration Use the Port Security feature to lock one or more ports on the system. When a port is locked, only packets with an allowable source MAC addresses can be forwarded. All other packets are discarded. To display the Port Security Configuration page, click Security > Traffic Control, and then click the Port Security > Port Security Configuration link. To configure the global port security mode: 1. In the Port Security Mode field, select the appropriate radio button to enable or disable port security on the switch. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. If you change the mode, click Apply to apply the change to the system. The Port Security Violation table shows information about violations that occurred on ports that are enabled for port security. The following table describes the fields in the Port Security Violation table. Field Port Last Violation MAC VLAN ID Description Identifies the port where a violation occurred. Displays the source MAC address of the last packet that was discarded at a locked port. Displays the VLAN ID corresponding to the Last Violation MAC address. Click Refresh to refresh the page with the most current data from the switch. 230