Dell 5130 Color Laser User's Guide (PDF) - Page 114

*1 This item is available only when the RAM disk is on or the optional hard disk is installed. Printer Settings The Printer Settings tab includes System Settings, Parallel Settings, Network Settings, USB Settings, PCL Settings, PS Settings, and Secure Settings pages. System Settings Purpose: To configure the basic printer settings. Values: Power Saver Time-Sleep Power Saver Time-Deep Sleep Control Panel Tone Invalid Key Tone Machine Ready Tone Job Completed Tone Fault Tone Alert Tone Out of Paper Alert Tone Low Toner Alert Tone Base Tone Fault Time-Out Job Time-Out Panel Language Auto Log Print Print ID Print Text Banner Sheet Insert Position Banner Sheet Specify Tray RAM Disk*1 Substitute Tray mm / inch Letterhead Sets the time for transition to the power saver mode (Sleep). Sets the time for transition to the power saver mode (Deep Sleep). Specifies whether to enable the tone that is emitted when the operator panel input is correct. Specifies whether to enable the tone that is emitted when the operator panel input is incorrect. Specifies whether to enable the tone that is emitted when the printer becomes ready. Specifies whether to enable the tone that is emitted when a print job is complete. Specifies whether to enable the tone that is emitted when a job ends abnormally. Specifies whether to enable the tone that is emitted when a problem occurs. Specifies whether to enable the tone that is emitted when the printer runs out of paper. Specifies whether to enable the tone that is emitted when toner or some other consumable is low. Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop menu. Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-out time is exceeded. Specifies in seconds the amount of time the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out time is exceeded. Sets the language to be used on the operator panel. Specifies whether to automatically print a log of completed jobs after every 20 jobs. Specifies where to print the user ID on the output paper. Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Specifies where to insert a banner sheet. Specifies which input tray to use to insert a banner sheet. Specifies the amount of memory allocated for the file system, Secure Print and Proof Print features. Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current job. Specifies the measurement unit to be used on the operator panel screen as either mm or inches. Specifies that duplex printing is selected for two-sided letterhead media.