Dell 5130 Color Laser User's Guide (PDF) - Page 180
Binary, Purpose, Values, Sleep, 30 min., Deep Sleep, Control, Panel, Invalid Key, Machine, Ready
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Binary Used when no special processing is required for data. System Settings Use the System Settings menu to configure a variety of printer features. NOTE: Values marked by an asterisk (*) are the factory default menu settings. PowerSaver Time Purpose: To specify the time for transition to power saver mode. Values: Sleep 15 min.* Specifies the time for transition to the power saver time (Sleep) in minutes. 5-30 min. 15 min.* Deep Sleep Specifies the time for transition to the power saver time (Deep Sleep) in minutes. 1-29 min. Enter 5 to put the printer in power saver mode five minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 5 and 30 minutes for power save mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax printer. You can also return the printer to the standby mode by pressing any button on the operator panel. Audio Tones Purpose: To configure settings for tones emitted by the printer during operation or when a warning message appears. Values: Control Panel Off* Does not emit a tone when the operator panel input is correct. On Emits a tone when the operator panel input is correct. Invalid Key Off* Does not emit a tone when the operator panel input is incorrect. On Emits a tone when the operator panel input is incorrect. Machine Ready Off* Does not emit a tone when the printer becomes ready. On Emits a tone when the printer becomes ready. Job Completed Off* Does not emit a tone when a job is complete. On Emits a tone when a job is complete. Fault Tone Off* Does not emit a tone when a job ends abnormally. On Emits a tone when a job ends abnormally. Alert Tone Off* Does not emit a tone when a problem occurs. On Emits a tone when a problem occurs. Off* Does not emit a tone when the printer runs out of paper. Out of Paper On Emits a tone when the printer runs out of paper.