Dell 5130 Color Laser User's Guide (PDF) - Page 175

Values: Auto* Detects the Ethernet settings automatically. 10Base Half Uses 10 base-T half-duplex. 10Base Full Uses 10 base-T full-duplex. 100Base Half Uses 100 base-TX half-duplex. 100Base Full Uses 100 base-TX full-duplex. 1000Base Full Uses 1000 base-T full-duplex. Status Purpose: To display the information on the wireless signal strength. Any change cannot be made on the operator panel to improve the status of the wireless connection. Values: Good Indicates good signal strength. Acceptable Indicates marginal signal strength. Low Indicates insufficient signal strength. No Reception Indicates that no signal is received. NOTE: This item is available only when connecting the printer with a wired network. Wireless Setup Purpose: To configure the wireless network interface. Values: Enter Network (SSID) Manual Setup Infra structure Infra structure Specify a name to identify the wireless network. Up to 32 alphanumeric characters can be entered. Select when you configure the wireless setting through the access point such as a wireless router. No Security Specify No Security to configure the wireless setting without specifying a security method from WEP, WPA-PSK-TKIP, and WPA-PSK-AES. WEP Key Entry (64Bit) Specify the WEP 64bit Key to use through the wireless network. Up to 10 hexadecimal characters can be entered. Transmit Specify the transmit key from WEP Key 1, WEP Key 2, WEP Key Key 3, and WEP Key 4. WEP Key Entry (128Bit) Specify the WEP 128bit Key to use through the wireless network. Up to 26 hexadecimal characters can be entered. Transmit Specify the transmit key from WEP Key 1, WEP Key 2, WEP Key Key 3, and WEP Key 4. WPA-PSKTKIP Select to configure the wireless setting with the security method of WPA-PSKTKIP. Pass Phrase Specify the passphrase of alphanumeric characters from 8 to 63 only when WPA-PSK-TKIP is selected for Encryption. WPA2PSK-AES Select to configure the wireless setting with the security method of WPA2-PSKAES. Pass Phrase Specify the passphrase of alphanumeric characters from 8 to 63 only when WPA-PSK-AES is selected for Encryption.