Dell 5130 Color Laser User's Guide (PDF) - Page 131

Re-enter Community Name (Trap)*1 Enter the community name used for trap again to confirm it. Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format: IPv4 Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" Trap is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first Notification 1-4 three-digits only. IP socket mmmmm is a variable value between 0 and 65,535. IPv6 Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65,535. Authenticate Error Trap Select the check box to notify Authenticate Error Trap. *1 The default value of each items can be changed by using Dell Printer Configuration Web Tool. SNMP v3 Purpose: To edit the detailed settings of SNMP v3 protocol. To enter this page, click Enable SNMP v3 Protocol in the SNMP page. Values: Administrator Account Account Enabled User Name Authentication Password Re-enter Authentication Password Privacy Password Re-enter Privacy Password Print Drivers / Remote Client Account Account Enabled Reset to default Password Select the check box to enable the administrator account. Enter the user name of the administrator account. Specifies the authentication password of the administrator account using 8 to 32 alphanumeric characters. Enter the authentication password of the administrator account again to confirm it. Specifies the privacy password of the administrator account using 8 to 32 alphanumeric characters. Enter the privacy password of the administrator account again to confirm it. Select the check box to enable the print drivers and remote client account. Click to reset the password for the print drivers and remote client account to default. Wireless LAN Purpose: To configure the detailed setting for the wireless network. To use the wireless adapter, be sure to disconnect the network cable. NOTE: Once wireless LAN is activated, wired LAN protocol will be disabled. Values: SSID Specifies the name that identifies the wireless network. Up to 32 alphanumeric characters.