Dell 5130 Color Laser User's Guide (PDF) - Page 126
Current Ethernet Settings, Apply New settings
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Purpose: To specify whether to enable or disable printing ports and management protocol features. Values: Auto Detects Ethernet transmission rate and the duplex settings automatically. 10Base-T Half-Duplex Selects 10Base-T Half-Duplex as the default value. Ethernet Settings Ethernet *1 10Base-T Full-Duplex 100Base-TX HalfDuplex 100Base-TX FullDuplex Selects 10Base-T Full-Duplex as the default value. Selects 100Base-TX Half-Duplex as the default value. Selects 100Base-TX Full-Duplex as the default value. 1000Base-T FullDuplex Selects 1000Base-T Full-Duplex as the default value. Current Ethernet Settings Displays the current settings of Ethernet. MAC Address Displays the printer's MAC address. LPD Select the check box to enable LPD. Port9100 Select the check box to enable Port9100. IPP Select the check box to enable the IPP port. WSD Select the check box to enable the WSD port. FTP Select the check box to enable FTP. Port Status NetWare Select the check box to enable the NetWare port. You can also configure the transport protocol to be used. TCP/IP can be selected simultaneously as the transport protocol. Bonjour (mDNS) Select the check box to enable the Bonjour(mDNS) feature. E-Mail Alert Select the check box to enable the E-Mail Alert feature. Telnet Select the check box to enable Telnet. SNMP Select the check box to enable the SNMP (Simple Network Management Protocol). You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport protocol. *1 This item is available only when connecting the printer with a wired network. NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the settings, click the Apply New settings button to apply new settings. TCP/IP Purpose: To configure the IP address, subnet mask, and gateway address of the printer. Values: IP Mode Host Name IPv4 Specifies the IP mode. Specifies the host name. IP Address Mode Selects the IP address mode. Manual IP Address Sets the IP address. Manual Subnet Sets the subnet mask.