Dell 5130 Color Laser User's Guide (PDF) - Page 177
Protocol, IP Filter, No. n/Address
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Protocol Purpose: To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again. Values: LPD Enable* Enables the LPD port. Disable Disables the LPD port. Port9100 Enable* Enables the Port9100 port. Disable Disables the Port9100 port. IPP Enable* Enables the IPP port. Disable Disables the IPP port. FTP Enable* Enables FTP. Disable Disables FTP. NetWare Enable* Uses IP for NetWare. Disable Does not use IP for NetWare. WSD Enable* Enables the WSD port. Disable Disables the WSD port. SNMP Enable* Enables the UDP. Disable Disables the UDP. E-Mail Alert Enable* Enables the E-mail Alerts feature. Disable Disables the E-mail Alerts feature. EWS Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer. Disable Disables an access to Dell Printer Configuration Web Tool embedded in the printer. Enable* Enables the Bonjour(mDNS). Bonjour(mDNS) Disable Disables the Bonjour(mDNS). Telnet Enable* Enables the Telnet. Disable Disables the Telnet. Enable* Enables the HTTP-SSL/TLS. HTTP-SSL/TLS*1 Disable Disables the HTTP-SSL/TLS. *1 This item is displayed only when the self-signed certificate is generated. IP Filter Purpose: To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP addresses. The change becomes effective after the printer is turned off and then on again. Values: No. n/Address (n is 1-5.)*1 Sets the IP address for Filter n. No. n/Mask (n is 1-5.)*1 Sets the address mask for Filter n. Off* Disable the IP Filter feature for Filter n. No. n/Mode (n is 1-5.)*1 Accept Accepts an access from the specified IP address.