Dell 5130 Color Laser User's Guide (PDF) - Page 200

MPF Mode Specified Stop printing and show an error on the operator panel if the paper specified from the printer driver does not match the paper configured for the MPF from the operator panel. Driver Continue to print even if the paper specified from the printer driver does not match the paper Specified* configured for the MPF from the operator panel. On* Display Popup Off Specifies the size and type of paper loaded in the MPF. This item is available only when Panel Specified is selected for MPF Mode. Size and type of paper loaded in the MPF is not specified. This item is available only when Panel Specified is selected for MPF Mode. *1 S2 indicates papers whose one side has been printed already. NOTE: For the tray 1, optional 550-sheet feeder, or optional 1100-sheet feeder setting paper size is not required. These trays detect the paper size automatically. For more information on supported paper size for the standard and optional trays, see "Supported Paper Sizes." Use this menu item to: Optimize print quality for the specified paper. Select paper source through your software program by selecting type and size. Automatically link trays. The printer automatically links any trays containing the same type and size of paper, if you have set the Paper Type to the correct values. Tray 1 Purpose: To specify the paper loaded in the top tray. Values: Plain(60 to 90 gsm)* Plain Thick (80/90 to 105 gsm) Transparency Covers(106 to 163 gsm) Covers Thick (164 to 216g sm) Paper Type Label Coated (106 to 163 gsm) Coated Thick (164 to 216 gsm) Envelope Recycled Letter Head Auto* Monarch DL C5 Paper Size Envelope #10 210 mm*/8.3 inch* X Size Specifies the width of the custom size paper. 77 - 215 mm/3.0-8.5 inches Custom Size 297 mm*/11.7 inch* Y Size Specifies the length of the custom size paper. 127 - 355 mm/5.0-14.0 inches