Dell 5130 Color Laser User's Guide (PDF) - Page 115

Duplex Mode Low Toner Alert Msg Specifies whether to show the message when the toner is short. Job Offset*2 Banner Sheet Offset*2 Job Offset of Staple*2 Stapler Cart. Empty*2 Specifies whether to offset the position of the output paper. Specifies whether to put the banner sheet per offset print. Specifies whether to staple the offset print. Specifies whether to continue the print job when the stapler cartridge is empty. *1 This item is available only when the optional memory module is installed, and also when the optional hard disk is not installed. *2 This item is available only when the optional output expander is installed. Parallel Settings Purpose: To configure the parallel interface. Values: Parallel Port Specifies whether to enable the parallel interface. ECP Specifies whether to enable the ECP communication mode of the parallel interface. Adobe Protocol Specifies PostScript communication protocol for each interface. Network Settings Purpose: To Specify the PostScript communication protocol for this printer. Values: Adobe Protocol Specifies PostScript communication protocol for each interface. USB Settings Purpose: To change printer settings affecting a USB port. Values: USB Port Specifies whether to enable the USB interface. Adobe Protocol Specifies PostScript communication protocol for each interface. PCL Settings Purpose: To change the printer settings that only affect jobs using the PCL emulation printer language. Values: