Dell 5130 Color Laser User's Guide (PDF) - Page 211
When Using the Operator Panel, ColorTrack Mode, No Account User Print, No-account User Password
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
When Using the Operator Panel You can specify only the settings of ColorTrack Mode, No Account User Print, and ColorTrack Error Report using the operator Panel. 1. Press Menu button. 2. Press button until Admin Menu is highlighted, and then press (Set) button. 3. Press button until System Settings is highlighted, and then press (Set) button. 4. Press button until ColorTrack Mode is highlighted, and then press (Set) button. 5. Press button until External Mode is highlighted, and then press (Set) button. 6. Press Cancel or button to return to the previous menu. 7. Press button until No Account User Print is highlighted, and then press (Set) button. 8. Press button to select Off or On, and then press (Set) button. 9. Press Cancel or button to return to the previous menu. 10. Press button until ColorTrack Error Report is highlighted, and then press (Set) button. 11. Press button to select Off or On, and then press 12. Turn off the printer to apply the settings. (Set) button. ColorTrack Mode The following two authentication modes are available: the Internal Mode using user information registered on the printer, and the External Mode using user information registered on an external server. To authenticate on the external authentication server with External Mode, you need not register user information on the printer. The change becomes effective after the printer is turned off and then on again. No Account User Print Specify whether to permit the printing of data with no authentication information. This setting is enabled when the printer is restarted. The change becomes effective after the printer is turned off and then on again. No-account User Password Specify the password to be used for non-account user using 1 to 127 alphanumeric characters. If the password is left blank (NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then on again. NOTE: When External Mode is specified and No Account User Print is set to On, you must set a password. NOTE: When using an LDAP server, you also must set the same password on the server. Re-enter No-account User Password Enter the No-account user password again to confirm it. ColorTrack Error Report