Dell 5130 Color Laser User's Guide (PDF) - Page 212

Specify whether to automatically print error-related information if printing using ColorTrack results in an error. Setup Remote Authentication Click Setup Remote Authentication Page to display the Authentication System page. NOTE: This item is displayed only when External Mode is specified. Authentication System Specify the server authentication type, the server response time-out, or the search time-out. When Using the Dell™ Printer Configuration Web Tool 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Print Server Settings. 3. Click the Security tab. 4. Select Authentication System. Authentication System page is displayed. Select the authentication system for Authentication System Settings. Specify the time-out period for Server Response Time-Out. Specify the time-out period for Search Time-Out. 5. Click the Apply New settings button, and then turn off the printer to apply the settings. Authentication System Settings Select the authentication system from the list. The change becomes effective after the printer is turned off and then on again. Server Response Time-Out Specify the amount of time the printer should wait for response from the server. Set the time period from 1 up to 75 seconds. The change becomes effective after the printer is turned off and then on again. Search Time-Out Specify the amount of time the printer should wait for searching for the server. Set the time period from 5 up to 120 seconds. The change becomes effective after the printer is turned off and then on again. Kerberos Server