Home » Dell Manuals » Printers » Dell 5130 Color Laser » Manual Viewer

Dell 5130 Color Laser User's Guide (PDF) - Page 330

Replacing the Separator Rollers, Installing a Fuser

View all Dell 5130 Color Laser manuals

Add to My Manuals
Save this manual to your list of manuals

Page 330 highlights

NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you replace the fuser. 3. Grasp both handles of the installed fuser with your hands and pull it out. Installing a Fuser 1. Unpack a new fuser. 2. Grasp both handles of the fuser with your hands and install the fuser in the printer. 3. Close the right hand cover. NOTE: When closing the right hand cover, apply your hand in the vicinity of the handle as shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the right hand cover. Replacing the Separator Rollers There are three separator rollers in the printer which need to be replaced periodically. One is in the tray and the others are inside the printer. All the separator rollers are replaced in the same way as described in this section.

Section	Page
Local Disk	1
Dell™ 5130cdn Color Laser Printer User's Guide:	3
Finding Information:	4
About the Printer:	7
Prepare Printer Hardware:	11
Install Optional Accessories (if applicable):	15
Connect Printer to Computer or Network:	72
Perform Initial Settings:	78
Install Printer Drivers on the Windows Computers:	81
Install the PPD File on Macintosh Computers:	93
Dell Printer Configuration Web Tool:	98
Print Media Guidelines:	141
Loading Print Media:	149
Operator Panel:	160
Printing:	162
Printer Settings:	168
Understanding the Tool Box Menus:	172
Understanding the Printer Menus:	173
Understanding Your Printer Software:	206
Printing Using ColorTrack (External Authentication):	210
Using Digital Certificates:	218
Understanding Fonts:	226
Understanding Printer Messages:	233
Printing With Web Services on Devices (WSD):	244
Printing With UX Filter (UNIX):	246
Printing With CUPS (Linux):	313
Printer Specifications:	318
Maintaining Your Printer:	321
Removing Options:	355
Clearing Jams:	371
Troubleshooting:	385

Match case Limit results 1 per page

NOTE:

Stand straight in front of the right hand cover and not in front of the front cover, whenever you replace the

fuser.

3. Grasp both handles of the installed fuser with your hands and pull it out.

Installing a Fuser

1. Unpack a new fuser.

2. Grasp both handles of the fuser with your hands and install the fuser in the printer.

3. Close the right hand cover.

NOTE:

When closing the right hand cover, apply your hand in the vicinity of the handle as shown in the illustration,

and then press the cover firmly toward the printer.

NOTE:

Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the

right hand cover.

Replacing the Separator Rollers

There are three separator rollers in the printer which need to be replaced periodically. One is in the tray and the others

are inside the printer. All the separator rollers are replaced in the same way as described in this section.