Dell 5130 Color Laser User's Guide (PDF) - Page 403

Does this solve your problem? Change the envelope with another one and 4c then try again. Is the problem reduced or recovered? complete. The task is complete. Go to action 3b. MPF Misfeed jam Action Proceed to the action corresponding to the type of the print media being used: Thick - 2a 1 Thin - 2b Coated - 2c Envelope - 2d manual Dup - 2e Others - 2f Use thick paper that is 216 gsm or less. 2a Does this solve your problem? Use thin paper that is 60 gsm or more. 2b Does this solve your problem? Load coated paper one sheet at a time. 2c Does this solve your problem? Correct the position of the envelop flap. See "Loading Print Media." 2d Does this solve your problem? Ensure that the print media is not curled. 2e Does this solve your problem? Is the print media damp? 2f If so, turn the media over and then try again. Does this solve your problem? Fan the print media. 3a Does this solve your problem? Wipe the separator rollers in MPF with a cloth moistened with water. 3b Does this solve your problem? Press the envelope to expel any remaining air in it. 3c Does this solve your problem? Smooth the envelope if there is any distortion on it. 3d Does this solve your problem? Use print media that is not damp. 4a Does this solve your problem? Reduce the number of envelopes set. 4b Does this solve your problem? Change the envelope with another one and then try again. 4c Is the problem reduced or recovered? Yes - The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. The task is complete. No - Go to action 3a. Go to action 3a. Go to action 3b. Go to action 3c. Go to action 3a. Go to action 4a. Go to action 3b. Contact Dell. Go to action 3d. Go to action 4b. Go to action 3a. Go to action 4c. Go to action 3b.